Phone: (716) 759-3080 E-Mail: viton@sealanddesign.com
Viton O-Rings
Viton V91A O-Rings
Viton® (fluorocarbon rubber) has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals making it a good choice for an o-ring material.
Low temperature resistance is normally not favorable and for static applications is limited to approximately -15 °F (-26 °C) although in certain situations it is suitable down to -40 °F (-40 °C) Under dynamic conditions, the lowest service temperature is between 5 °F and 0 °F (-15 °C and -18 °C).
Gas permeability is very low and similar to that of butyl rubber. Special fluorocarbon compounds exhibit an improved resistance to acids, fuels, water and steam.
Viton® O-Ring General Attributes
- Excellent Heat resistance
- Excellent resistance to oils
- Low compression set
- Good fuel resistance
- Excellent ozone and weather resistance
Common Applications for Viton® O-Rings
- Engine Oil Seals
- Fuel Systems
- High Temperature Seals
- Petrochemical Systems
Available Varieties
Flurocarbon Compuond | Available Specifications | Key Characteristics | Average Temperature Ranges |
Commercial | ASTM D2000 | Available in black or brown. Excellent resistance to head and a wide range of chemicals. | 5° to 446°F |
AMS7276 | AMS 7276, M83248/1, Mil-R-83248 CL1, Dwg AS3208, AS3209 |
Meets AMS7276. Excellent resistance to heat, engine oils and lubricants, ozone and weathering. Low compression set and good fuel resistance. | -13° to 392°F |
AMS7259 | AMS 7259, M83248/2, Mil-R-83248 CL2, Dwg AS3581 |
Meets AMS7259. Similar to AMS 7276 above except in 90-durometer hardness. | -13° to 392°F |
M83485/1 GLT Type | M84385/1, AMS-R-83485, Mil-R-83485 |
Meets AMS-R-83485. Excellent heat resistance and low temperature performance. GLT Type Viton. | -35° to 400°F |
GFLT Viton | ASTM D2000 / SAE J200, M7HK 710 A1-10 B38 EF31 Z1 Z2 Z3 |
GFLT based FKM. Good for low temp with improved chemical resistance. Listed for fuel/alcohol applications. | -31° to 392°F |
FDA Viton | ASTM D2000 / SAE J200 M2HK 710 A1-10 B37 B38 EF31 F15 Z |
FDA, USDA, and NSF grades available. | -4° to 392°F |
Viton Extreme | Extreme chemical service. Strong bases and amines. Peroxide cured. | -4° to 392°F | |
Viton V91A | Low Temperature applications. Explosive decompression resistant. | -51° to 437°F |
Seal & Design is a leading supplier of Viton® O-rings and custom molded seals. We offer both genuine Viton® and standard fluorocarbon materials for general purpose and high performance applications. Selecting the type of Viton® that best fits your application is important, but it isn't complicated, and help is available from Seal & Design. We also offer gaskets made out of Viton®.
Contact Seal & Design Inc. for more information about our Viton O-Rings offerings or for more information about other gasket compounds visit Seal & Design's Website.